К нашему сайту подключен сервис веб-аналитики Яндекс Метрика, использующий cookie
ОК
Magne turntable system
Fully airbearing turntable with lineair tracking airbearing tonearm.
The platter – centred by a spindel – floats on an air film. Magne turntable system is extremely simple to adjust and operate.
$ 13, 400
Magne T.T. system
Magne means “strength”. In Nordic mythology Magne is the super baby, son of Thor, the God of Thunder, and when he is three days old he is so strong that he can lift a dead giant away from his father, who is pinned underneath. Magne is one of the few Gods, who survive Ragnerok, the nordic armageddon, and rebuilds the new world.
Airsupply
The air supply has been the object of our greatest attention. The goal is to design a silent air supply, which could be placed in the listening room, and deliver an even, clean and dry air flow.The pump is an oil free, long life unit, which do not require much maintenance.

The impulses from the pump are absorbed in an encapsulated reservoir. This results in an even airflow to the air bearing. The air supply is mounted with a filter, which prevents dust particles in entering the system. The filter is replaceable when necessary.
Airbearing Turntables
“Air bearings are superior to traditional bearings, as airberings do not generate mechanical friction, and therefore no mechanical noise – thus the perfect starting point for the highest achievable analog sound.”
— Johnnie Bergmann
Linear tracking airbearing tonearm
In the design of the tonearm, we stay to our idea of simplicity: As few parts and assemblies as possible, to avoid resonances. The armtube is traditional for Bergmann tonearms- well considered construction in few parts, made as a double tube construction, with damping in between the tubes. All parts are assembled by 2 component epoxy – simple and vibration free design to secure as pure and coherent reproduction.
Technical specifications
Turntable:
Airbearing design.Record flatten by a clamp.Tacho motor. High precision feedback control system.
Platter/Bearing:
Aluminium platter/Polycarbonate mat, supported by air, and centered by a hard anodized
Weight:
Platter weight: 5.5 kg.
Subplatter: AluminiumWeight: 1.5kg.
Dimensions: 440 x 495 x 165 (D x W x H)
Total weight: 20,0 kg.
Tonearm:
Linear tracking airbearing tonearm.
Aluminium/carbon. Armtube damped inside. Counter weight decoupled from armtube.
Wire: Pure copper litz.
Clips: Gold plated copper.
Connectors: Gold plated RCA, XLR, DIN.Effective mass: 11g.
Airsupply:
Silent: Clean, dry and smooth airflow. Replaceable dust filter.
Dimensions:370 x 195 x 175 (D x W x H)Weight:8,3kg.
Plinth:
Polymer material/aluminium.
When design & sound matters
All products are developed, produced and assembled inhouse. Every single part in the products are designed by Johnnie Bergmann and manufactured in the Bergmann workshop in Denmark.
$ 13, 400
Exclusively at bergmann's
Vacuum hold down
By floating on an air cushion, the platter also gains the advantage of a very good isolation from the surroundings, same way as the known -and very expensive- air supported shelfs, used in many highend audio systems.
\
Airbearing turntables
The platter is centered by a steel spindle, running in a very frictionless, low noise and hard wearing polymeric bearing material, and floats on a thin air cushion, which lower the mechanical bearing noise to an absolute minimum- if any.
Linear tracking
The linear tracking tonearm, on Odin Tonearm, tracks the record as it is pressed = no tracking error.The benefit is a distortion free and relaxed reproduction, even at complex passages.
Vacuum hold down
By floating on an air cushion, the platter also gains the advantage of a very good isolation from the surroundings, same way as the known -and very expensive- air supported shelfs, used in many highend audio systems.
Airbearing turntables
The platter is centered by a steel spindle, running in a very frictionless, low noise and hard wearing polymeric bearing material, and floats on a thin air cushion, which lower the mechanical bearing noise to an absolute minimum- if any.
Linear tracking
The linear tracking tonearm, on Odin Tonearm, tracks the record as it is pressed = no tracking error.The benefit is a distortion free and relaxed reproduction, even at complex passages.
Johnnie Bergmann
As a teenager, I bought my first audio system- Micro Seiki table, Rega arm, Ortofon cartridge, NAD pre-/amp and Dali speakers. All hifi magazines, I came across, were read carefully. At that time- in the 80.ties- I became familiar with the airbearing technic. To me it was obvious the most optimal way to build the perfect turntable.
About
Every single part of the Air bearing Turntables and Tonearms are designed by Johnnie Bergmann and manufactured in the Bergmann workshop in Denmark.
Established in 2008, by Johnnie Bergmann. First model launched was model Sindre.
Cookie Policy
Follow Bergmann Audio:
©️ 2023 Bergman audio
The site is made within the framework of the Window container 3.0 Intensive.
Made on
Tilda